Serving Brevard County & all of Florida
Finished flagstone pattern stamped concrete driveway at a Brevard County home
Call (321) 215-5817 Get a Free Quote

Pavers vs Concrete Driveway: Which Fits a Brevard County Home?

Neither wins on every Brevard County driveway: concrete goes in as one slab in less time, and pavers take longer. A bad paver section comes up and goes back with the same stones, and you get more patterns and colors. We build both, so one free on-site estimate prices both on your driveway.

This post compares plain poured concrete, broom or smooth finish, with a paver driveway. Still choosing who builds it? Our page on driveway contractors covers the first visit through the finished drive.

How does each driveway fail here, and what does the repair look like?

Concrete shrinks as it cures, and shrinking concrete cracks. We saw-cut a grid of joints across the slab, and those joints tell the cracks where to go. A crack that follows a joint is doing what the joint was cut for.

Bigger trouble starts under the slab. Concrete poured on loose sand settles at the edges and cracks over time. Rain can also move sand out from under an old slab, and the concrete drops into the void. Tree roots are the other common cause in older yards, and they have to come out before a repour.

A broken section comes out along a saw cut at a straight line or joint, so the seam looks planned. New concrete will not match older concrete in color, so the new section reads as a different shade. If you want one even color, the whole surface has to be replaced.

A slab that has failed everywhere gets broken out and hauled off. A new concrete driveway then goes in on a rebuilt, compacted base.

A paver driveway usually fails in spots. A low area near the garage is common, and so is a sunken tire track. A tree root can lift a few stones. Water is the other trigger, and a downspout dumping beside the drive is the common one.

The concrete paver industry’s own technical guidance says settlement is often caused by inadequate soil or base compaction. So the fix starts below the surface. We lift those pavers, rebuild the base and reset the same stones.

That guidance says removed pavers can go back with no wasted paving materials or unsightly patches. It also notes that no curing means fast repairs. When a whole field goes wavy, it gets relaid with the same stones. Our paver repair page covers that work.

How soon can you drive on concrete versus pavers?

Cars can park on new concrete after about seven days. Concrete keeps gaining strength that whole time, and early weight leaves cracks you cannot undo. A loaded truck or a dumpster waits the full 28 days, which matters if a roof job is coming.

Pavers do not cure the way a slab does, so the wait sits in the joints. After polymeric sand goes in, two makers’ guides ask for 24 hours before foot traffic and 72 hours before cars.

The build itself runs the other way. A new concrete driveway usually takes two to three working days, and a residential paver driveway about three to five. Add the build and the wait together, and a paver drive can give your car back a few days sooner.

Weather can move either date. Afternoon storms can pit a fresh surface, so we watch the radar and move the pour. Summer storms can also push a paver job, since base rock cannot be compacted wet.

Do pavers or concrete give you more choices on look and finish?

Pavers give you more to pick from. Herringbone, running bond and custom layouts each come in a range of colors, and a border can frame the field. Our post on paver patterns covers how each one holds up under tires.

Concrete keeps it simple. A broom or smooth finish gives you one clean surface, and integral color is the usual upgrade. Our guide to concrete finishes compares the options.

Which driveway takes more upkeep?

On a paver driveway, the joints are the job. When the seams start to open, the old joint sand gets dug out and fresh polymeric sand goes in. Sweeping new sand over old joints does not last. Sealing is optional and mostly a color choice.

A broom finish is the easiest concrete finish to clean, and a slab has no sand joints to refill. If you do seal a driveway, plan on resealing about every six years. A drive in full sun all day needs it sooner.

Do Brevard permits and HOA rules care which material you pick?

The Palm Bay and county driveway codes do not limit their rules to one material. A concrete drive and a paver drive fall under the same rule. In Palm Bay, the right of way runs roughly 10 to 15 feet behind the curb or pavement edge.

The street end of your driveway sits in that strip. Building, rebuilding or repairing a driveway in a city road or easement needs a driveway permit from Public Works. Outside city limits, county roads and easements carry the same kind of rule.

Our driveway and patio permit guide has the city and county detail. The permit question for your driveway gets settled at the free on-site estimate.

HOAs add their own layer. Suntree’s architectural review criteria list concrete, stamped concrete and pavers among acceptable driveway materials. All colors and materials must still be approved there. Other communities keep their own approved lists, so check yours on color and pattern before you pick.

Concrete or pavers for a driveway: which one fits yours?

Start with what runs under the drive. If a pipe under the drive may need work later, pavers have the edge. The concrete paver industry’s own technical guidance says pavers can come up for underground utility work and go back afterward. It also says a paver surface opens and closes without jack hammers, unlike a poured slab.

Then look at your trees. A root that lifts a few pavers means a small repair, since those stones come up and go back. A root that cracks a slab can mean a tear-out and a repour.

Check the calendar next. Concrete is the shorter build and the longer wait, while pavers are the reverse. If a date matters, ask about both timelines at the estimate.

Pattern usually settles the rest. A herringbone field with a border means a paver driveway. One clean surface with a broom finish means a concrete driveway.

We do pavers and concrete under one roof, so both options get priced on your project. Our page on hiring a driveway contractor covers how that first visit works. We are based in Palm Bay and work all of Brevard County and across Florida. Call (321) 215-5817 or book a free on-site estimate.

Frequently Asked Questions

Is a paver driveway better than a concrete driveway in Florida?

Neither one is better on every lot. Concrete goes in faster and gives you one clean surface. Pavers take longer, but a bad spot comes up and the same stones go back down. On a Brevard lot, it usually comes down to what runs under the drive and how much pattern you want.

Do paver driveways crack like concrete driveways?

A paver driveway is separate stones with sand in the joints, so there is no single slab to crack. One stone can break, and it gets replaced with a matching stone. Concrete shrinks as it cures, so a slab cracks, and saw-cut joints tell those cracks where to go.

Can you replace a concrete driveway with pavers?

Yes, and a failed slab gets broken out and hauled off first. The sand gets graded and compacted, and the paver driveway goes in on a new base. A sound slab can take thin pavers on top instead, which is a paver overlay. Either way, we look at the slab first at the free on-site estimate.

Can you mix pavers and concrete on one driveway?

Yes. Paver ribbon strips along the sides of a concrete drive widen it so a second car fits. A paver apron at the street is another way to mix them. Both materials get priced at the same free on-site estimate.

Ready to Start Your Project?

Get In Touch With Slab & Stone

A driveway that needs replacing, a patio you want stamped, a pool deck past its best? Call or send the form. We come out, look at the job with you, and quote it free.

Get a Free Estimate

Tell us about your project. We get back to you fast.

Call (321) 215-5817